您现在的位置:首页 - 产品中心
BLE/Zigbee/Thread/.. - BDE-RFM207P (带有功率放大器的多协议模组)
  • BDE-RFM207P (带有功率放大器的多协议模组)
  • 浏览 232 次 发布日期:[ 2021-5-19 ]



  • 碧德(BDE)是美国德州仪器(TI)第三方合作伙伴


    多协议 2.4G 无线模组


    BDE-RFM207P是一款针对低功耗传感器和PC/手机配件的多协议2.4G无线模块它支持Thread、Zigbee、Bluetooth 5.2 Low Energy、IEEE 802.15.4g、支持ipv6的智能对象(6LoWPAN)、Wi-SUN、专有系统、SimpleLink TI 15.4-Stack (2.4 GHz)和动态多协议管理器(DMM)驱动。

    BDE-RFM207P具有集成的功率放大器,可实现20 dBm输出功率。BDE-RFM207P在SoC中高度集成了无线电、堆栈、配置文件和应用程序,无需使用外部MCU。该模块还为传感器应用提供了灵活的硬件接口。它可以实现超低功耗连接和数据传输,适用于对功耗、尺寸和成本敏感的应用程序。


    Key Features

    - Microcontroller
    - Powerful 48-MHz Arm® Cortex®-M4F processor
    - 352KB of in-system Programmable Flash
    - 256KB of ROM for protocols and library functions
    - 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
    - 80KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.
    - 2-Pin cJTAG and JTAG debugging
    - Supports Over-the-Air upgrade (OTA)
    - Ultra-low power sensor controller with 4KB of SRAM
    - Sample, store, and process sensor data
    - Operation independent from system CPU
    - Fast wake-up for low-power operation
    - TI-RTOS, drivers, Bootloader, Bluetooth® 5 Low Energy Controller, and IEEE 802.15.4 MAC in ROM for optimized application size
    - Peripherals
    - Digital peripherals can be routed to any GPIO
    - 4× 32-bit or 8× 16-bit general-purpose timers
    - 12-Bit ADC, 200 kSamples/s, 8 channels
    - 2× comparators with internal reference DAC
    - (1× continuous time, 1× ultra-low power)
    - Programmable current source
    - 2× UART
    - 2× SSI (SPI, MICROWIRE, TI)
    - I2C
    - I2S
    - Real-Time Clock (RTC)
    - AES 128- and 256-bit Crypto Accelerator
    - ECC and RSA Public Key Hardware Accelerator
    - SHA2 Accelerator (Full suite up to SHA-512)
    - True Random Number Generator (TRNG)
    - Capacitive sensing, up to 8 channels
    - Integrated temperature and battery monitor
    - External system
    - On-chip Buck DC/DC converter
    - Low power
    - Wide supply voltage range: 1.8 V to 3.8 V
    - Active-Mode RX: 6.9 mA
    - Active-Mode TX 0 dBm: 7.3 mA
    - Active-Mode TX 5 dBm: 9.6 mA
    - Active-Mode TX at +10 dBm: 22 mA
    - Active-Mode TX at +20 dBm: 85 mA
    - Active-Mode MCU 48 MHz (CoreMark):
    - 3.4 mA (71 μA/MHz)
    - Sensor Controller, Low Power-Mode, 2 MHz, running infinite loop: 30.1 μA
    - Sensor Controller, Active-Mode, 24 MHz, running infinite loop: 808 μA
    - Standby: 0.94 μA (RTC on, 80KB RAM and CPU retention)
    - Shutdown: 150 nA (wakeup on external events)
    - Radio section
    - 2.4 GHz RF transceiver compatible with Bluetooth 5 Low Energy and IEEE 802.15.4 PHY and MAC
    - Excellent receiver sensitivity:
    - –100 dBm for 802.15.4 (2.4 GHz),
    - –105 dBm for Bluetooth 125-kbps (LE Coded PHY)
    - Output power up to +20 dBm with temperature compensation
    - Suitable for systems targeting compliance with worldwide radio frequency regulations
    - Wireless protocols
    - Thread, Zigbee®, Bluetooth® 5 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Wi-SUN®, proprietary systems, SimpleLink™ TI 15.4-Stack (2.4 GHz), and Dynamic Multiprotocol Manager (DMM) driver.
    - Size: 29.86 mm x 19.98 mm x 2.15 mm (With Shieldin-g) 
    - Certification
    -FCC ID: 2ABRU-RFM207P
    -IC: 25657-RFM207P
    -CE-RED

  • 上一个:BDE-RFM207 (多协议)
  • 下一个:BDE-RFM207B (芯片集成低频晶振的多协议2.4G无线模组)
Copyright © 2018-2022 广州碧德科技股份有限公司 版权所有