- Wi-Fi 2.4GHz/5GHz Dual-Band and Bluetooth &  BLE Dual-Mode.

- Integrates RF, Power Amplifiers (PAs), Clock, RF Switches, Filters, Passives, and Power Management

- Operating Temperature: –40°C to +85°C

- Dimension: 13.3 × 13.4 × 2.0 mm

- LGA-100 pin Package

- Certifications

- FCC ID: 2ABRU-BW2837, IC: 25657-BW2837, CE-RED compliant

- Wi-Fi-Bluetooth Single Antenna Coexistence

Wi-Fi

- WLAN Baseband Processor and RF Transceiver Support of IEEE Std 802.11a, 802.11b, 802.11g, and 802.11n

- 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for High Throughput: 80 Mbps (TCP), 100 Mbps (UDP)

- 2.4-GHz MRC Support for Extended Range and

5-GHz Diversity Capable

- Wi-Fi Direct Concurrent Operation

(Multichannel, Multirole)

- Fully calibrated system (production calibration not required)

- Hardware-based encryption-decryption using 64-, 128-, and 256-bit WEP, TKIP, or AES keys

- Requirements for Wi-Fi-protected access (WPA and WPA2.0) and IEEE Std 802.11i (includes hardware-accelerated Advanced Encryption Standard [AES])

-  Advanced coexistence scheme with Bluetooth and Bluetooth low energy wireless technology

- 4-bit SDIO host interface, including high speed (HS) and V3 modes

- Low Wi-Fi Power Consumption in Connected Idle (< 800 μA)

- Configurable Wake on WLAN Filters to Only Wake Up the System

Bluetooth® and BLE

- Bluetooth 4.2 Secure Connection Compliant and

- CSA2 Support

- Host Controller Interface (HCI) Transport for

- Bluetooth Over UART

- Dedicated Audio Processor Support of SBC Encoding + A2DP

- Certified Bluetooth- and BLE Dual mode Stack

- BLE up to 10 low energy connections