Location:Home - Products
Multi-Protocol - BDE-RFM207P (Multi-Protocol with PA Based on CC2652P)
  • BDE-RFM207P (Multi-Protocol with PA Based on CC2652P)

  • BDE-RFM207P is a multiprotocol 2.4G wireless module targeted at low power sensors and PC/Phone accessories. It supports Thread, Zigbee, Bluetooth 5.0 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Wi-SUN, proprietary systems, SimpleLink TI 15.4-Stack (2.4 GHz), and Dynamic Multiprotocol Manager (DMM) driver.

    BDE-RFM207P has an integrated power amplifier, which enable 20 dBm output power.

    BDE-RFM207P highly integrates radio, stack, profile and applications in a SoC, without the need of using an external MCU. The module also offers flexible hardware interfaces for the sensor application.

    It enables ultra-low power connectivity and data transfer for the applications that are sensitive to power consumption, size and cost.

    Key Features

    - Microcontroller
    - Powerful 48-MHz Arm® Cortex®-M4F processor
    - 352KB of in-system Programmable Flash
    - 256KB of ROM for protocols and library functions
    - 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
    - 80KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.
    - 2-Pin cJTAG and JTAG debugging
    - Supports Over-the-Air upgrade (OTA)
    - Ultra-low power sensor controller with 4KB of SRAM
    - Sample, store, and process sensor data
    - Operation independent from system CPU
    - Fast wake-up for low-power operation
    - TI-RTOS, drivers, Bootloader, Bluetooth® 5 Low Energy Controller, and IEEE 802.15.4 MAC in ROM for optimized application size
    - Peripherals
    - Digital peripherals can be routed to any GPIO
    - 4× 32-bit or 8× 16-bit general-purpose timers
    - 12-Bit ADC, 200 kSamples/s, 8 channels
    - 2× comparators with internal reference DAC
    - (1× continuous time, 1× ultra-low power)
    - Programmable current source
    - 2× UART
    - I2C
    - I2S
    - Real-Time Clock (RTC)
    - AES 128- and 256-bit Crypto Accelerator
    - ECC and RSA Public Key Hardware Accelerator
    - SHA2 Accelerator (Full suite up to SHA-512)
    - True Random Number Generator (TRNG)
    - Capacitive sensing, up to 8 channels
    - Integrated temperature and battery monitor
    - External system
    - On-chip Buck DC/DC converter
    - Low power
    - Wide supply voltage range: 1.8 V to 3.8 V
    - Active-Mode RX: 6.9 mA
    - Active-Mode TX 0 dBm: 7.3 mA
    - Active-Mode TX 5 dBm: 9.6 mA
    - Active-Mode TX at +10 dBm: 22 mA
    - Active-Mode TX at +20 dBm: 85 mA
    - Active-Mode MCU 48 MHz (CoreMark):
    - 3.4 mA (71 μA/MHz)
    - Sensor Controller, Low Power-Mode, 2 MHz, running infinite loop: 30.1 μA
    - Sensor Controller, Active-Mode, 24 MHz, running infinite loop: 808 μA
    - Standby: 0.94 μA (RTC on, 80KB RAM and CPU retention)
    - Shutdown: 150 nA (wakeup on external events)
    - Radio section
    - 2.4 GHz RF transceiver compatible with Bluetooth 5 Low Energy and IEEE 802.15.4 PHY and MAC
    - Excellent receiver sensitivity:
    - –100 dBm for 802.15.4 (2.4 GHz),
    - –105 dBm for Bluetooth 125-kbps (LE Coded PHY)
    - Output power up to +20 dBm with temperature compensation
    - Suitable for systems targeting compliance with worldwide radio frequency regulations
    - Wireless protocols
    - Thread, Zigbee®, Bluetooth® 5 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Wi-SUN®, proprietary systems, SimpleLink™ TI 15.4-Stack (2.4 GHz), and Dynamic Multiprotocol Manager (DMM) driver.
    - Size: 29.86 mm x 19.98 mm x 2.15 mm (With Shieldin-g) 
    - Certification
     - FCC ID: 2ABRU-RFM207P
            - IC: 25657-RFM207P
            - CE-RED


  • Pre: BDE-RFM207-IN (Industrial Multi-Protocol Based on CC2652R)
  • Next: BDE-RFM207B (Crystal-less Multi-Protocol Based on CC2652RB)
Copyright © 2021 BDE Technology. All rights reserved|Chicago, Illinois 60603