Location:Home - Products
BLE/Zigbee/Thread/.. - BDE-RFM207-IN (Industrial Multi-protocol)
  • BDE-RFM207-IN (Industrial Multi-protocol)
  • Browse 957, Release date: [ 2019-12-25 ]

  • Multiprotocol 2.4G Wireless Module

    BDE-RFM207-IN is an industrial grade multiprotocol 2.4G wireless module targeted at low power sensors and PC/Phone accessories. It supports Thread, Zigbee, Bluetooth 5 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Wi-SUN, proprietary systems, SimpleLink TI 15.4-Stack (2.4 GHz), and Dynamic Multiprotocol Manager (DMM) driver.

    BDE-RFM207-IN highly integrates radio, stack, profile and applications in a SoC, without the need of using an external MCU. The module also offers flexible hardware interfaces for the sensor application.

    It is made for extreme operating temperature and no disruption industrial applications. 


    Key Features

    - Multiprotocol, Bluetooth 5.2 low energy, Zigbee, Thread

    - Powerful ARM Cortex-M4F processor

    -Clock speed: up to 48MHz

    - 352KB of In-System programmable flash

    - 80KB SRAM

    - 8KB of cache SRAM

    - 2-Pin cJTAG and JTAG debugging

    - Support Over-the-Air upgrade (OTA)

    - Ultra-Low power sensor controller with 4KB of SRAM

    - 31 GPIOs

    - 4 x 32-Bit or 8 x 16-Bit general purpose timer

    - 12-Bit ADC, 200 kSamples/s, 8 channels

    - 2 x comparator with internal reference DAC

    - Programmable current source

    - 2 x UART

    - 2 x SSI (SPI, MICROWIRE, TI)

    - IIC, IIS

    - Real-Time-Clock (RTC)

    - AES 128- and 256-bit crypto accelerator

    - ECC and RSA public key hardware accelerator

    - SHA2 accelerator (Full suite up to SHA-512)

    - True Random Number Generator (TRNG)

    - Capacitive sensing, up to 8 channels

    - Integrated temperature and battery monitor

    - On-Chip buck DC/DC converter

    - RF performance

    - TX power: Output power up to +5 dBm with temperature compensation

    - RX sensitivity: up to -105dBm (LE coded PHY)

    - Communication range: about 250 meters (LOS) – Long Range Mode

    - Antenna: PCB antenna, 1.71 dBi average gain, 2.18 dBi peak gain

    - Size: 22.95 mm x 15 mm x 2.15 mm (With Shielding)

    - Ultra low power consumption:

    - Shutdown: 150nA (Wake up on external events)

    - Standby: 0.94uA (RTC running and RAM/CPU retention)

    -11uA at +105⁰C operating temperature

    - RX current: 6.9mA

    - TX current @ 0dBm: 7.3mA

    - TX current @ 5dBm: 9.6mA

    Industrial grade operating temperature range from -40⁰C to +105⁰C

    - Long life nonvolatile memory at extreme working temperature

    - Low soft error rate for long operation lifetime with always-on SRAM parity checking against corruption due to potential radiation events, suitable for no disruption industrial applications

    - FCC ID: 2ABRU-RFM207, IC: 25657-RFM207, CE-RED


    Applications 

    - 2400 to 2480 MHz ISM and SRD systems with down to 4 kHz of receive bandwidth

    - Building automation

    - Grid infrastructure

    - Industrial transport – asset tracking

    - Medical

    - Electronic point of sale (EPOS) – Electronic Shelf Label (ESL)


    Download


  • Pre: BDE-RFM207 (Multi-Protocol)
  • Next: BDE-RFM207P (Multi-Protocol with PA)
Copyright © 2021 BDE Technology. All rights reserved|Chicago, Illinois 60603