- BDE-BLEM215(Bluetooth 5.0 Low Energy Based on CC2642R)
-
- General DescriptionBDE-BLEM215 is a Bluetooth 5.0 single-mode compliant Bluetooth low energy module targeted at low power sensors and PC/Phone accessories. BDE-BLEM215 highly integrates Bluetooth Low Energy radio, stack, profile and applications in a SoC, without the need of using an external MCU. The module also offers flexible hardware interfaces for the sensor application. It supports 2 Mbps and PHY-coded which are the new added features from BT5.0. It enables ultra-low power connectivity and data transfer for the applications that are sensitive to power consumption, size and cost.
Key Features
Bluetooth 4 and 5 low energy
Powerful ARM Cortex-M4F processor
Clock speed: up to 48MHz
352KB of In-System programmable flash with
8KB cache
80KB SRAM
8KB of cache SRAM
2-Pin cJTAG and JTAG debugging
Support Over-the-Air upgrade (OTA)
Ultra-Low power sensor controller with 4KB of
SRAM
31 GPIOs
4 x 32-Bit or 8 x 16-Bit general purpose timer
12-Bit ADC, 200 k Samples/s, 8 channels
2 x comparator with internal reference DAC
Programmable current source
2 x UART
2 x SSI (SPI, MICROWIRE, TI)
IIC, IIS
Real-Time-Clock (RTC)
AES 128- and 256-bit crypto accelerator
ECC and RSA public key hardware accelerator
SHA2 accelerator (Full suite up to SHA-512)
True Random Number Generator (TRNG)
Capacitive sensing, up to 8 channels
Integrated temperature and battery monitor
On-Chip buck DC/DC converter
RF performance
TX power: -21dBm to 5dBm
RX sensitivity: up to -105dBm (LE coded PHY)
Communication range: about 250 meters (LOS) – Long
Range Mode
Antenna: PCB antenna
Size: 22 mm x 15 mm x 2.1 mm (With Shielding)
Ultra low power consumption
Shutdown: 120nA (Wake up on external events)
Standby: 0.95uA (RTC running and RAM/CPU
retention)
RX current: 6.9mA
TX current @ 0dBm: 7.4mA
TX current @ 5dBm: 9.7mA
Download
- Pre: BDE-LE2640R2FAU(Bluetooth 5.0 Low Energy Based on CC2642R2F)
- Next: BDE-LE2640R2LAU(Bluetooth 5.0 Low Energy Based on CC2642R2L)
