BDE-BLEM205 is a Bluetooth 5.2 single-mode compliant Bluetooth low energy module targeted at low power sensors and PC/Phone accessories.
BDE-BLEM205 highly integrates Bluetooth Low Energy radio, stack, profile and applications in a SoC, without the need of using an external MCU. The module also offers flexible hardware interfaces for the sensor application. It supports 2 Mbps and PHY-coded which are the new added features from BT5.0. The module is Bluetooth, FCC, ISED and CE-RED certified.
It enables ultra-low power
connectivity and data transfer for the applications that are sensitive to power
consumption, size and cost.
Key Features
Bluetooth 5.2 low energy compliant
Powerful ARM Cortex-M4F processor
Clock speed: up to 48MHz
352KB of In-System programmable flash with 8KB cache
80KB SRAM
8KB of cache SRAM
2-Pin cJTAG and JTAG debugging
Support Over-the-Air upgrade (OTA)
Ultra-Low power sensor controller with 4KB of SRAM
31 GPIOs
4 x 32-Bit or 8 x 16-Bit general purpose timer
12-Bit ADC, 200 k Samples/s, 8 channels
2 x comparator with internal reference DAC
Programmable current source
2 x UART
2 x SSI (SPI, MICROWIRE, TI)
IIC, IIS
Real-Time-Clock (RTC)
AES 128- and 256-bit crypto accelerator
ECC and RSA public key hardware accelerator
SHA2 accelerator (Full suite up to SHA-512)
True Random Number Generator (TRNG)
Capacitive sensing, up to 8 channels
Integrated temperature and battery monitor
On-Chip buck DC/DC converter
RF performance
TX power: -21dBm to 5dBm
RX sensitivity: up to -105dBm (LE coded PHY)
Communication range: about 250 meters (LOS) – Long Range Mode
Antenna: PCB antenna
Size: 22.95 mm x 15 mm x 2.1 mm (With Shielding)
Ultra low power consumption
Shutdown: 120nA (Wake up on external events)
Standby: 0.95uA (RTC running and RAM/CPU retention)
RX current: 6.9mA
TX current @ 0dBm: 7.4mA
TX current @ 5dBm: 9.7mA
Certifications
Bluetooth- DID: D050902, QDID: 151505
FCC ID: 2ABRUBDLEM205
IC: 25657-BLEM205
CE-RED
Download