- BDE-BLEM205-IN(Industrial GradeBluetooth 5.0 Low Energy Based on CC2642R)
-
- General DescriptionBDE-BLEM205-IN is a Bluetooth 5.2 single-mode compliant Bluetooth low energy module targeted at low power sensors and PC/Phone accessories.BDE-BLEM205-IN highly integrates Bluetooth Low Energy radio, stack, profile and applications in a SoC, without the need of using an external MCU. The module also offers flexible hardware interfaces for the sensor application. It supports 2 Mbps and PHY-coded which are the new added features from BT5.0. The module is Bluetooth, FCC, ISED and CE-RED certified.It enables ultra-low power connectivity and data transfer for the applications that are sensitive to power consumption, size and cost. The module is designed to operate from from -40⁰C to +105⁰C.
Key Features
Bluetooth 5.2 low energy compliant
Powerful ARM Cortex-M4F processor
Clock speed: up to 48MHz
352KB of In-System programmable flash with 8KB cache
80KB SRAM
8KB of cache SRAM
2-Pin cJTAG and JTAG debugging
Support Over-the-Air upgrade (OTA)
Ultra-Low power sensor controller with 4KB of SRAM
31 GPIOs
4 x 32-Bit or 8 x 16-Bit general purpose timer
12-Bit ADC, 200 k Samples/s, 8 channels
2 x comparator with internal reference DAC
Programmable current source
2 x UART
2 x SSI (SPI, MICROWIRE, TI)
IIC, IIS
Real-Time-Clock (RTC)
AES 128- and 256-bit crypto accelerator
ECC and RSA public key hardware accelerator
SHA2 accelerator (Full suite up to SHA-512)
True Random Number Generator (TRNG)
Capacitive sensing, up to 8 channels
Integrated temperature and battery monitor
On-Chip buck DC/DC converter
RF performance
TX power: -21dBm to 5dBm
RX sensitivity: up to -105dBm (LE coded PHY)
Communication range: about 250 meters (LOS) – Long Range Mode
Antenna: PCB antenna, 1.17 dBi gain
Size: 22.95 mm x 15 mm x 2.1 mm (With Shielding)
Ultra low power consumption:
Shutdown: 120nA (Wake up on external events)
Standby: 0.95uA (RTC running and RAM/CPU retention)
RX current: 6.9mA
TX current @ 0dBm: 7.4mA
TX current @ 5dBm: 9.7mA
Industrial grade operating temperature range from -40⁰C to +105⁰C
Pin to pin compatible with BDE-BLEM205
Certifications
Bluetooth- DID: D050902, QDID: 151505
FCC ID: 2ABRU-BLEM205IN
IC: 25657-BLEM205
CE-RED
Download
- Pre: BDE-BLEM401P(Bluetooth 5.0 Low Energy Based on BK3432)
- Next: BDE-BLEM301(Bluetooth 5.1 Low Energy Based on DA14531)
