Wi-Fi 2.4GHz/5GHz Dual-Band and Bluetooth & BLE Dual-Mode.
Integrates RF, Power Amplifiers (PAs), Clock, RF Switches, Filters, Passives, and Power Management
Operating Temperature: –40°C to +85°C
Dimension: 13.3 × 13.4 × 2.0 mm
LGA-100 pin Package
Certifications
FCC ID: 2ABRU-BW2837, IC: 25657-BW2837, CERED compliant
Wi-Fi-Bluetooth Single Antenna Coexistence
Wi-Fi
WLAN Baseband Processor and RF Transceiver Support of IEEE Std 802.11a, 802.11b, 802.11g, and 802.11n
20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for High Throughput: 80 Mbps (TCP), 100 Mbps (UDP)
2.4-GHz MRC Support for Extended Range and 5-GHz Diversity Capable
Wi-Fi Direct Concurrent Operation (Multichannel, Multirole)
Fully calibrated system (production calibration not required)
Hardware-based encryption-decryption using 64-, 128-, and 256-bit WEP, TKIP, or AES keys
Requirements for Wi-Fi-protected access (WPA and WPA2.0) and IEEE Std 802.11i (includes hardware-accelerated Advanced Encryption Standard [AES])
Advanced coexistence scheme with Bluetooth and Bluetooth low energy wireless technology
4-bit SDIO host interface, including high speed (HS) and V3 modes
Low Wi-Fi Power Consumption in Connected Idle (< 800 µA)
Configurable Wake on WLAN Filters to Only Wake Up the System
Bluetooth® and Bluetooth Low Energy
Bluetooth 4.2 Secure Connection Compliant and
CSA2 Support
Host Controller Interface (HCI) Transport for
Bluetooth Over UART
Dedicated Audio Processor Support of SBC Encoding + A2DP
Certified Bluetooth- and BLE Dual mode Stack
BLE up to 10 low energy connections
Download
Datasheet: