Location:Home - Products
WiFi - BDE-WF3220SFN(WiFi MCU Module Based on CC3220SF)
  • BDE-WF3220SFN(WiFi MCU Module Based on CC3220SF)


  • General Description

    The WF3220 module, is a 802.11b/g/n, IPv4 & IPv6 Low Energy module based on CC3220S/F SoC.


    The module offers a unique combination of lower power, integration of all external components except antenna.


    Created for IoT , the WF3220 module is a wireless module that integrates two physically separated on-chip MCUs, application processor and network processor.


    The WF3220 module is supported by easy to work with software to lower the threshold of using Wi-Fi technology or speeding up design time significantly.


    The combination of affordable cost, lowest power and ease of use makes it an ideal product for the mass market, including the makers community.


    Key Features


    Fully integrated and green and RoHS modules include all required clocks, SPI flash, and passives

    802.11b/g/n: 2.4 GHz

    FIPS 140-2 Level 1 validated IC inside

    Multilayered security features help developers protect identities, data, and software IP

    Low-power modes for battery-powered applications

    Coexistence with 2.4-GHz radios

    Industrial temperature: –40°C to +85°C

    1.27-mm pitch QFM package for easy assembly and low-cost PCB design

    Transferrable Wi-Fi Alliance® certification

    Application microcontroller subsystem:

    Arm® Cortex®-M4 core at 80 MHz

    User-dedicated memory:

    256KB of RAM

    Optional 1MB of executable flash

    Rich set of peripherals and timers:

    McASP supports two I2S channels

    SD, SPI, I2C, UART, ADC

    8-bit parallel interface

    Timers and PWM

    Watchdog timer

    Up to 21 GPIO pins

    Debug interfaces: JTAG, cJTAG, SWD

    Wi-Fi network processor subsystem:

    Wi-Fi® core:

    802.11 b/g/n

    Modes:

    802.11b/g/n Station

    802.11b/g/n Access Point Supports up to Four Stations

    Wi-Fi Direct® Client and Group Owner

    Security:

    WEP

    WPA™/ WPA2™ PSK

    WPA2 Enterprise

    WPA3™ Personal

    Internet and application protocols:

    HTTPs server, mDNS, DNS-SD, DHCP

    IPv4 and IPv6 TCP/IP stack

    16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)

    Built-in power management subsystem:

    Configurable low-power profiles (always on, intermittently connected, tag)

    Advanced low-power modes

    Integrated DC/DC regulators

    Multilayered security features:

    Separate execution environments

    Networking security

    Device identity and key

    Hardware accelerator cryptographic engines(AES, DES, SHA/MD5, CRC)

    File system security (encryption, authentication, access control)

    Initial secure programming

    Software tamper detection

    Secure boot

    Certificate signing request (CSR)

    Unique per device key pair

    Application throughput

    UDP: 16 Mbps

    TCP: 13 Mbps

    Power-Management Subsystem:

    Integrated DC/DC converters support a wide range of supply voltage:

    Single wide-voltage supply VBAT: 2.3 V to 3.6 V

    Advanced low-power modes:

    Shutdown: 1 µA, Hibernate: 5 µA

    Low-power deep sleep (LPDS): 135 µA

    Idle connected (MCU in LPDS): 710 µA

    RX traffic (MCU active): 59 mA

    TX traffic (MCU active): 223 mA

    Wi-Fi TX power

    17 dBm at 1 DSSS

    13.5dBm at 54 OFDM

    Wi-Fi RX sensitivity

    –95 dBm at 1 DSSS

    -73.5 dBm at 54 OFDM

    Additional integrated components

    40.0-MHz crystal

    32.768-kHz crystal (RTC)

    32Mbit SPI serial flash(see Device Family)

    RF filters, diplexer and passive components

    Footprint-compatible QFM package

    1.27-mm pitch, 63-pin, 17.5mm × 20.5mm × 2.4mm

    Module supports the TI SimpleLink Developer's Ecosystem


    Download

    Datasheet:




  • Pre: BDE-WF3220SFA(U)(WiFi MCU Module Based on CC3220SF)
  • Next: BDE-WF3220SN(WiFi MCU Module Based on CC3220S)
Copyright © 2021 BDE Technology. All rights reserved|Chicago, Illinois 60603