The BDE-WF3220
module, is a 802.11b/g/n, IPv4 & IPv6 Low Energy module based on CC3220S/F
SoC.
The
module offers a unique combination of lower power, integration of all external
components including chip antenna at a very affordable cost.
Created
for IoT , the BDE-WF3220 module is a wireless module that integrates two physically
separated on-chip MCUs, application processor and network processor.
The BDE-WF3220
module is supported by easy to work with software to lower the threshold of
using Wi-Fi technology or speeding up design time significantly.
The
combination of affordable cost, lowest power and ease of use makes it an ideal
product for the mass market, including the makers community.
Key Features
- Fully integrated and green and RoHS modules include
all required clocks, SPI flash, and passives
- 802.11b/g/n: 2.4 GHz
- FIPS 140-2 Level 1 validated IC inside
- Multilayered security features help
developers protect identities, data, and software IP
- Low-power modes for battery-powered
applications
- Coexistence with 2.4-GHz radios
- Industrial temperature: –40°C to +85°C
- WF3220 module includes a chip antenna for
easy integration into the host system
- 1.27-mm pitch QFM package for easy assembly
and low-cost PCB design
- Transferrable Wi-Fi Alliance® certification
- Application microcontroller subsystem:
- Arm® Cortex®-M4 core at 80 MHz
- User-dedicated memory:
- 256KB of RAM
- 1MB of executable flash
- 4MB External Serial Flash
- Rich set of peripherals and timers:
- McASP supports two I2S channels
- SD, SPI, I2C, UART, ADC
- 8-bit parallel interface
- Timers and PWM
- Watchdog timer
- Up to 21 GPIO pins
- Debug interfaces: JTAG, cJTAG, SWD
- Wi-Fi network processor subsystem:
- Wi-Fi® core:
- 802.11 b/g/n
- Modes:
- 802.11b/g/n Station
- 802.11b/g/n Access Point Supports up to Four
Stations
- Wi-Fi Direct® Client and Group Owner
- Security:
- WEP
- WPA™/ WPA2™ PSK
- WPA2 Enterprise
- WPA3™ Personal
- Internet and application protocols:
- HTTPs server, mDNS, DNS-SD, DHCP
- IPv4 and IPv6 TCP/IP stack
- 16 BSD sockets (fully secured TLS
v1.2 and SSL 3.0)
- Built-in power management subsystem:
- Configurable low-power profiles (always on, intermittently connected,
tag)
- Advanced low-power modes
- Integrated DC/DC regulators
- Multilayered
security features:
- Separate execution environments
- Networking security
- Device identity and key
- Hardware accelerator cryptographic
engines(AES, DES, SHA/MD5, CRC)
- File system security (encryption,
authentication, access control)
- Initial secure programming
- Software tamper detection
- Secure boot
- Certificate signing request (CSR)
- Unique per device key pair
- Application
throughput
- UDP: 16 Mbps
- TCP: 13 Mbps
- Power-Management
Subsystem:
- Integrated DC/DC converters support a wide range
of supply voltage:
- Single wide-voltage supply
- VBAT:
2.3 V to 3.6 V
- Advanced low-power modes:
- Shutdown: 1 μA, Hibernate: 5 μA
- Low-power deep sleep (LPDS):
- 135
μA
- Idle connected (MCU in LPDS):
- 710
μA
- RX traffic (MCU active): 59 mA
- TX traffic (MCU active): 223 mA
- Wi-Fi TX power
- 17 dBm at 1 DSSS
- 13.5dBm at 54 OFDM
- Wi-Fi RX sensitivity
–95 dBm at 1 DSSS
-73.5 dBm at 54 OFDM
- Additional
integrated components
- 40.0-MHz crystal
- 32.768-kHz crystal (RTC)
- 32Mbit SPI serial flash(see Device Family)
- RF filters, diplexer and passive
components
- Footprint-compatible
QFM package
- 1.27-mm pitch, 63-pin, 25mm × 20.5mm × 2.4mm
- Module supports the TI SimpleLink Developer's
Ecosystem
Applications
- For Internet of Things applications, such as:
- Medical and Healthcare
- Multiparameter Patient Monitor
- Electrocardiogram (ECG)
- Electronic Hospital Bed & Bed Control
- Systems
- Building and Home Automation:
- HVAC Systems & Thermostat
- Video Surveillance, Video Doorbells, and Low-Power
Camera
- Building Security Systems and E-locks
- Appliances
- Asset Tracking
- Factory Automation
- Grid Infrastructure
Download