General Description

MP2652RSIPA is a multiprotocol 2.4-GHz wireless module targeted at low power sensors and PC/Phone accessories. It supports Thread, Zigbee, Bluetooth 5.0 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Wi-SUN, proprietary systems, SimpleLink TI 15.4-Stack (2.4- GHz), and Dynamic Multiprotocol Manager (DMM) driver.The module highly integrates radio, stack, profile and applications in a SoC, without the need of using an external MCU. The module also offers flexible hardware interfaces for the sensor application.It enables ultra-low power connectivity and data transfer for the applications that are sensitive to power consumption, size and cost.The module has a very small form factor with the dimensions of 15 mm x 12.9 mm x 2.2 mm.

Key Features

 Multiprotocol, Bluetooth 5.0 low energy, Zigbee, Thread

 Powerful ARM CortexM4F processor

 Clock speed: up to 48MHz

 352KB of InSystem programmable flash

 80KB SRAM

 8KB of cache SRAM

 2Pin cJTAG and JTAG debugging

 Support OvertheAir upgrade (OTA)

 UltraLow power sensor controller with 4KB of SRAM

 23 GPIOs

 4 x 32Bit or 8 x 16Bit general purpose timer

 12Bit ADC, 200 kSamples/s, 8 channels

 2 x comparator with internal reference DAC

 Programmable current source

 2 x UART

 2 x SSI (SPI, MICROWIRE, TI)

 IIC, IIS

 RealTimeClock (RTC)

 AES 128 and 256bit crypto accelerator

 ECC and RSA public key hardware accelerator

 SHA2 accelerator (Full suite up to SHA512)

 True Random Number Generator (TRNG)

 Capacitive sensing, up to 8 channels

 Integrated temperature and battery monitor

 OnChip buck DC/DC converter

 RF performance

 TX power: Output power up to +5 dBm with temperature compensation

 RX sensitivity: up to 105dBm (LE coded PHY)

 Antenna: Integrated chip antenna, 0.5 dBi peak gain

 Size: 15 mm x 12.9 mm x 2.2 mm (With Shield)

 Ultra low power consumption:

 Shutdown: 150nA (Wake up on external events)

 Standby: 0.94uA (RTC running and RAM/CPU retention)

 RX current: 6.9mA

 TX current @ 0dBm: 7.3mA

 TX current @ 5dBm: 9.6mA

 Certifications

 FCC ID: 2ABRURFM207

 IC: 25657RFM207

 CERED

 32bit timer x 3

 Singleended 10bit GPADC x 4

 Standards Conformance

 Bluetooth^® SIG

 CERED (Europe)

 FCC (US)

 ISED (Canada)

 Japan (Telec)

Download

BDE-MP2652RSIPA_Datasheet_Brief_V1.1.pdf