BDE-MP2652R7A(Multi-Protocol Based on CC2652R7)-BDE Technology Inc.

Location:Home - Products

Products

Bluetooth/WiFi Combo

Bluetooth Dual-Mode

Multi-Protocol - BDE-MP2652R7A(Multi-Protocol Based on CC2652R7)

BDE-MP2652R7A(Multi-Protocol Based on CC2652R7)
The BDE-MP2652R7A is a multiprotocol 2.4-GHz wireless module supporting Thread, Zigbee®, Matter, Bluetooth® 5.0 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The module is based on an Arm® Cortex® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The BDE-MP2652R7A has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. PHY and frequency switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The module supports +5 dBm TX at 9.7 mA in the 2.4-GHz band. It has a receive sensitivity of -103 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.

The module has a low sleep current of 0.9 μA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-μA system current.

The module has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements.

BDE-MP2652R7A integrates all required system-level hardware components including clocks, passives, and PCB antenna into a QFM package for easy assembly and low-cost PCB design.

Key Features

 Wireless microcontroller
 Powerful 48-MHz Arm® Cortex®-M4F processor
 704KB flash program memory
 256KB of ROM for protocols and library functions
 8KB of cache SRAM
 144KB of ultra-low leakage SRAM with parity for high-reliability operation
 Dynamic multiprotocol manager (DMM) driver
 Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.0 Low Energy, IEEE 802.15.4 PHY and MAC
 Supports over-the-air upgrade (OTA)
 Ultra-low power sensor controller
 Autonomous MCU with 4KB of SRAM
 Sample, store, and process sensor data
 Fast wake-up for low-power operation
 Software defined peripherals, capacitive touch, flow meter, LCD
 Low power consumption
 MCU consumption:
 3.10 mA active mode, CoreMark
 65 μA/MHz running CoreMark
 0.9 μA standby mode, RTC, 144KB RAM
 0.1 μA shutdown mode, wake-up on pin
 Ultra low-power sensor controller consumption:
 29.2 μA in 2 MHz mode
 799 μA in 24 MHz mode
 Radio Consumption:
 6.4 mA RX
 7.3 mA TX at 0 dBm
 9.7 mA TX at +5 dBm
 Wireless protocol support
 Thread, Zigbee®, Matter
 Bluetooth® 5.0 Low Energy
 SimpleLink™ TI 15.4-stack
 6LoWPAN
 Proprietary systems
 High performance radio
 -103 dBm for Bluetooth® Low Energy 125-kbps
 Output power up to +5 dBm with temperature compensation
 Regulatory compliance (On-going)
 FCC
 IC
 CE-RED
 MCU peripherals
 Digital peripherals can be routed to any GPIO
 Four 32-bit or eight 16-bit general-purpose timers
 12-bit ADC, 200 kSamples/s, 8 channels
 8-bit DAC
 Two comparators
 Programmable current source
 Two UART, two SSI, I2C, I2S
 Real-time clock (RTC)
 Integrated temperature and battery monitor
 Security enablers
 AES 128- and 256-bit cryptographic accelerator
 ECC and RSA public key hardware accelerator
 SHA2 Accelerator (full suite up to SHA-512)
 True random number generator (TRNG)
 Operating range
 On-chip buck DC/DC converter
 1.8-V to 3.8-V single supply voltage
 -40 to +85°C
 Antenna: PCB antenna
 Package
 Dimension: 22.95 mm x 15 mm x 2.15 mm
 QFM-36 (31 GPIOs)
 RoHS-compliant package

Applications

 2400 to 2480 MHz ISM and SRD systems with down to 4 kHz of receive bandwidth
 Building automation
 Building security systems – motion detector, electronic smart lock, door and window sensor, garage door system, gateway
 HVAC – thermostat, wireless environmental sensor, HVAC system controller, gateway
 Fire safety system – smoke and heat detector, fire alarm control panel (FACP)
 Video surveillance – IP network camera
 Elevators and escalators – elevator main control panel for elevators and escalators
 Industrial transport – asset tracking

Downloads

Datasheet: BDE-MP2652R7A_Datasheet_V1.0.pdf
User Guide: Matter_Over_Thread_Demo_Quick_Start_Guide_V0.1.pdf
User Guide: Matter_Over_Thread_Demo_User_Guide_V0.1.pdf
【Close】
Pre: BDE-MP2652RSIPA (Multi-Protocol Based on CC2652RSIP)
Next: BDE-MP2651R3A(Multi-Protocol Based on CC2651R3)