BDE-BW3350x1 series(TI CC3350 2.4/5GHz Wi-Fi6, -40°C to 105°C, tiny size）-BDE Technology Inc.

Location:Home - Products

Products

Bluetooth/WiFi Combo

Bluetooth Dual-Mode

Bluetooth/WiFi Combo - BDE-BW3350x1 series(TI CC3350 2.4/5GHz Wi-Fi6, -40°C to 105°C, tiny size）

BDE-BW3350x1 series(TI CC3350 2.4/5GHz Wi-Fi6, -40°C to 105°C, tiny size）
General Description

BDE-BW3350x1 is a 2.4-GHz & 5-GHz dual-band Wi-Fi 6 wireless module series based on TI’s CC3350. This module series is ideal for cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP, where the peak application throughput requirement is a maximum of 50 Mbps. The BDE-BW3350x1 module series is an excellent choice for bringing the efficiency of Wi-Fi 6 to embedded device applications, featuring a small PCB footprint and a highly optimized bill of materials for lower costs. Additionally, the module is backward compatible with Wi-Fi 4 (802.11 b/g/n) and Wi-Fi 5 (802.11 ac).

Key Features

 Highly optimized Wi-Fi 6 (802.11ax) system for low cost embedded IoT applications
 Seamless integration with any processor or MCU hosts capable of running a TCP/IP stack
 Integrated 2.4-GHz and 5-GHz PA for complete wireless solution with up to +20 dBm output power
 Application throughput up to 50 Mbps
 Wi-Fi 6
 2.4 GHz and 5 GHz, 20 MHz, single spatial stream
 MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax
 Target wake time (TWT), OFDMA, MU-MIMO (Downlink), Basic Service Set Coloring, and trigger frame for improved efficiency
 Hardware-based encryption and decryption supporting WPA2 and WPA3
 Excellent interoperability
 Support for 4 bit SDIO or SPI host interfaces
 Enhanced security
 Secured host interface
 Firmware authentication
 Anti-rollback protection
 Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
 3-wire or 1-wire PTA for external coexistence with additional 2.4-GHz radios (for example, Thread or Zigbee)
 Operating temperature: -40°C to +85°C or -40°C to +105°C
 Power management
 1V8_IN: 1.62 V - 1.98 V
 3V3_IN: 3 V – 3.6 V
 Clock source
 On-board 40 MHz XTAL fast clock
 Internal slow clock or external 32.768-kHz slow clock
 Antenna options
 ANT pin for external antenna
 U.FL connector for external antenna
 Integrated PCB trace antenna
 Package
 LGA-65, 11-mm x 11-mm x 2-mm (BDE-BW3350N1)
 LGA-65, 11-mm x 15-mm x 2-mm (BDE-BW3350A1)
 LGA-71, 11-mm x 15-mm x 2-mm (BDE-BW3350U1)
 Pin to Pin compatible with TI’s CC330xMOD (-N variants)
 Regulatory compliance
 FCC ID: 2ABRU-BW335S
 IC: 25657-BW335S
 TELEC: 219-248330
 CE-RED

Download:

Datasheet:

BDE-BW3350x1_Datasheet_V1.0.pdf

User Guide:

BDE-BW33xx_Module_User_Guide_V1.2.pdf
【Close】
Pre: BDE-BW3300NPxM2 series (TI CC3300 2.4GHz Wi-Fi6 M.2 card, -40°C to 105°C）
Next: BDE-BW3551 (TI CC3551 Dual-band Wi-Fi 6 & BLE, -40°C to 85°C）